The course will look at the control system techniques both theoretical and practical.
Course duration: - 2 days
- Introduction to control systems
- Control techniques
- Digital control techniques
- Analog control techniques
- PID control techniques
- Frequency response
- Tuning a control loop
£500.00 per person.
|
ControlLogix Fundamentals
An introduction to the ControlLogix range of hardware and programming tools.
Course length: - 3 days
Introduction to ControlLogix hardware: -
- Processors modules
- Communication modules
- I/O modules
- Hardware installation
- Flex I/O modules
Introduction to Studio 5000 programming
- Connecting to the processor
- Uploading/Downloading a program
- Navigation of the program
- On line configuration and parameter changes
- Forcing ladder logic.
- RSLogix trend functions
- Creating a programme in RSLogix
£650.00 per person.
|
A more advanced course for engineers. This course will enable an engineer to create a complete program in RSLogix5000.
Course length: - 5 days
Creating a program in RSLogix
- Program structure
- System database
- Adding I/O modules
- Program flow
Ladder logic programming
- Digital program functions
- Analog program functions
- Advanced programming techniques
Function block programming
- Types of function block
- Creating a program
Text based programming
- Creating a text-based program
- Basic text functions
- Advanced functions
Communication programming
- ControlNet networks
- Ethernet networks
£950.00 per person.
|
A more advanced course for engineers. The course will enable the delegates to create an application program using FactoryTalk View software.
Course duration: - 4 days
- Creating an application
- Creating a system database
- Creating graphic screens
- Visual basic programming
£800.00 per person.
|
An introduction to the FactoryTalk View software for operators and engineers.
Course duration: - 2 days
- Program structure
- Downloading a program to a PC
- Condition monitoring
- Trending
- Data/historic logs
- and routine servicing procedures.
- Modifications to system graphics
- Modification to system database
- Setting up communications to a PLC
£500.00 per person.
|
A course giving details of the operation of the gas turbine both mechanically and thermodynamically.
Course duration: - 3 Days
- Introduction to gas turbines
- The thermodynamic cycle
- The main components
- Driven equipment
- Gas turbine control
- Auxiliary systems
£650.00 per person.
|
RB211 inspection and maintenance
The course material will aim to give the delegates a thorough understanding of the inspection and maintenance of the RR RB211 engine. It will cover the following subjects:
Course length - 5 Days
1) General familiarization of the RB211
- Overview of RB211
- Description of major components
2) Operation and Maintenance
- Operating parameters of the RB211
- Maintenance routines general
- Maintenance routines 4000 hours
- Maintenance routines 8000 hours
3) Borescope inspection routines
- Use of borescope equipment
- Inspection points
- Assessing damage
- Establishing inspection intervals
4) RR Manuals
- Use of manuals
- Ordering spare parts
5) Training Manuals
£950.00 per person.
|