TCL | Online Shop
 

 

 
Manufacturer

All images used are for illustrative purposes.
Modules and terminal blocks/housings may be sold separately.
Please note all prices are excluding sales tax.

Artesis | AMT Pro
The Artesis AMT Pro is a portable motor driven equipment test system which automatically generates a condition assessment report within 15 minutes. The report will include existing electrical mechanical and operational faults, time to failure information, recommended corrective actions, and effects of faults on energy efficiency.

AMT Pro measures 3 phase Voltage and 3 phase current at 2500 Hz sampling rate. Motor tests are completed in under 10 minutes. yielding to an automatic test report indicating motor health with barcharts, list of electrical parameters and PSD (Power Spectral Density) results. The test results simultaneously sync to the secure cloud-based server allowing access to the reports on an IoT (Internet of Things) platform.



Mfg Part#: AMT Pro | Price: £20100.00 | Avaliable 10+ | More Info
Artesis | e-PCM LV (<690vAC)
e-PCM monitors the condition of generators and their prime movers, effectively using the generator itself as a sophisticated transducer. It uses advanced NASA-developed technology to provide automated set-up and fault diagnosis with minimal user intervention. It is simpler to use and more cost-effective than conventional systems. e-PCM is applicable to a very wide range of equipment, including turbo-alternators, diesel generators, and wind turbines, and is particularly valuable for equipment in inaccessible or hazardous environments.

e-PCM creates a digital twin of generators and their prime movers such as wind turbines. The digital twin is built up during self-learning phase of operation. During this phase the three voltages and three currents are continuously measured and processed using system identification algothims which determine the model parameters under a full range of operating states.

There is also a MV/HV version of the E-PCM, pricing is avaliable on request.



Mfg Part#: e-PCM | Price: £4500.00 | Avaliable 10+ | More Info
Artesis | e-MCM LV (<690vAC)
The Artesis e-MCM is a powerful online condition monitoring, predictive maintenance and power meter tool intended for critical AC rotating equipment. The patented machine learning algorithm of e-MCM enables comprehensive fault detection up to 6 months in advance. With around the clock monitoring and real-time model-based voltage and current analysis, e-MCM can detect electrical, mechanical as well as process faults of fixed, variable speed motors and generators while providing all the benefits without the high complication and cost of traditional systems.

Artesis e-MCM monitors the condition of equipment driven by an electric motor, effectively using the motor itself as a sophisticated transducer. It requires only connection into the motor's electrical supply, avoiding the need or specialised sensors. Because Artesis e-MCM is permanently installed, it provides continuous fault monitoring and does not depend on expensive manual data collection.

There is also a MV/HV version of the E-MCM, pricing is avaliable on request.



Mfg Part#: e-MCM | Price: £4700.00 | Avaliable 10+ | More Info
Istec | SpeedSys 200
The SpeedSys 200 is a SIL-rated overspeed detection system for rotating machinery. It delivers a robust layer of protection with a compact footprint. Its small robust design and low-impact installation enables advanced protection in a wide range of machinery.

The SpeedSys 200 is built with safety in the design rather than the conventional methord of proven in use. �Proven in use� requires years of usage data. Changes to the device will invalidate this data and the certification. �Safe by design� allows for easy recertification after changes.
The module is designed for a wide range of applications. A single module can offer an economical and reliable solution for overspeed protection. Redundancy and voting structures can be created for more demanding applications or increased availability.



Mfg Part#: SpeedSys 200 | Price: £3400.00 | Avaliable 10+ | More Info
Istec | RecipSys 200
The RecipSys 200 is a compact monitoring system for reciprocating compressors. It delivers precise real-time data of rider band wear, eliminating the need for periodic production shutdowns to do manual inspections. The transmitter-based system is affordable and extends the range of compressors which can be monitored.

RecipSys 200 is designed as an independent layer of protection; It removes the needs to bulky 19" vibration racks and delivers lightning quick and reliable protection, while complying to the latest industry standards.

The module is housed in a small DIN rail mountable housing and is fully functional as an independent monitoring system outside your DCS system.



Mfg Part#: RecipSys 200 | Price: £3400.00 | Avaliable 10+ | More Info